

Protecting People in Public Places
Flexible and adaptable, permanent and rental options
In recent years, security incidents have affected different public spaces around the world, including:
- City centres
- Pedestrian precincts
- Parks
- Sports venues
- Shopping centres
- Transport hubs
- Bars and restaurants
- Places of worship
Careful planning can mitigate the impact of these threats whilst ensuring that the spaces continue to be welcoming and attractive.
CLD has a wide range of aesthetic and high security systems which are ideal for creating boundaries, guiding traffic and protecting, which can be used permanently or temporarily.
Our systems include fencing, access gates and barriers and HVM (hostile vehicle mitigation).
CLD's systems include its innovative FenceSafe Base which allows the deployment of a temporary perimeter, even a security-rated one, that can be quickly installed and leaves no trace when removed.
Our FenceSafe Base, as a foundation-free system, is manufactured from 100% Recycled MDPE. Match it with a mesh panel that contains at least 90% recycled British and European steel and you will have one of the most sustainable systems in the marketplace.
Eclipse
V Mesh Profiled Fencing System
FenceSafe Base
Temporary Physical Security Base
FenceSafe Dulok Lite
On-ground/temporary multi-purpose double wire panel system
FenceSafe Eclipse
On-ground/temporary v-mesh profiled rigid mesh panel
FenceSafe LockMaster
Temporary Swing Gate
FenceSafe Securus SR1
Temporary Security Rated Fencing
FenceSafe SlideMaster
Temporary Sliding Gate
FenceSafe-E
Temporary Monitored Pulse Fencing
HoardSafe
Secure & Sustainable Hoarding System
ModSec Base
Modular Physical Security System
Safeogril
Open Mesh Fencing System
Secureogril
Railing Fence System
Rampart 30
Multi-threat Security Fence to LPS 1175 A1, B3, C5 or D10 (SR1, SR2, SR3 or SR4) and PAS 68:2010
Rampart 50
Multi-threat Security Fence to LPS 1175 A1, B3, C5 or D10 (SR1, SR2, SR3 or SR4) and HVM to IWA 14-1:2013
Protecting People in Public Places FAQs
Temporary fencing is imperative in areas where interim security measures are required. However, it must be easy to install, and move, whilst being easy enough to take down, but also acting as a physical security barrier. As well as acting as a visual deterrent, just as a permanent counterpart would do. Temporary fencing is a cost-effective way of creating physical barriers to create ‘sections’ or ‘areas’ on a site, as well as protecting the perimeter of a site.
Any kind of temporary fencing must meet certain requirements that ensure it is safe and fit for purpose. Our fencing conforms to BS EN:1991 for wind loading and BS 1772 Part 14 for crowd loading to 800n.
On ground and temporary fencing systems are available to suit a wide variety of environments. They offer the same level f safety and security as a permanent installation but leave no trace. Meaning, once removed, you wouldn’t be able to tell it was once there.
Our on ground and temporary range varies from general purpose up to high security, including Profiled, Twin Wire, and 358 Mesh. Our high-security foundation-free fencing is tested and certified to LPS 1175 security ratings.
Our on ground and temporary systems use the same mesh panels as permanent options but with a zero-ground strike installation system. It guarantees the same level of security as its permanent counterpart. But, rather uses pre-assembled modular units and it is compatible as a pulse fence if needed to deter any potential security risks.
Use of our FenceSafe patented cantilever base, which can be weighted down using loose or bagged ballast of up to 200kg. Allowing our foundation-free fencing to remain in place for as long as is required. Tubs are weighted down to comply with wind loading standards and each tub is manufactured from 100% recycled plastic.
Latest News
Latest News from CLD Physical Security Systems